Kia Sportage JE, KM 2.0 CRDi Suspension Upgrades

1

Control Arm Lower-Front Bush Kit

A

Standard Alignment Kit

Please check OD before ordering!
Some Hyundai/Kia models may require a 70mm OD Bush.Standard Settings

Some Hyundai/Kia models may require a 70mm OD Bush, in this case please use SPF3776K

Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations.

Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution.

Quantity required: 1

Out of Stock. No longer stocked.

Kit Includes: 2 x Steel Tubes, 2 x Sleeves, 6 x Polyurethane Bushes

Fitment Difficulty:

Fitting Time: 3hrs

B

Performance Alignment Kit

SPF2102K

Please check OD before ordering!
Some Hyundai/Kia models may require a 70mm OD Bush.
up to 2 Degrees Caster Adjustment available
Alignment Correction. Caster Adjustment
Some Hyundai/Kia models may require a 70mm OD Bush, in this case please use SPF3809K.

A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.

Follow the installation instructions and enjoy the results!

Quantity required: 1

Out of Stock. No longer stocked.

Kit Includes: 2 x Steel Tubes, 2 x Sleeves, 6 x Polyurethane Bushes

Fitment Difficulty:

Fitting Time: 3hrs

C

Steering-Pull Correction Kit

SPF2101K

Please check OD before ordering!
Some Hyundai/Kia models may require a 70mm OD Bush.
1 Degree Caster Adjustment available
Alignment Correction. Caster Adjustment

Some Hyundai/Kia models may require a 70mm OD Bush, in this case please use SPF3808K.

Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturer's specifications.
Supplied with an offset bush to be fitted to the passenger side and a standard bush for the driver's side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics.
Follow the installation instructions and the problem is solved.

Quantity required: 1

Out of Stock. No longer stocked.

Kit Includes: 6 x Polyurethane Bushes, 2 x Sleeves, 2 x Steel Tubes

Fitment Difficulty:

Fitting Time: 3hrs

2

Sway Bar Link Kit - Heavy Duty Adjustable

TRC12160

12mm Ball Joint Adjustable Link
Minimum Length 210 mm - Maximum Length 260 mm
Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.

Features & Benefits

6060-T5 Alloy Link
Ball for low friction and long life
Spanner provision for on-car adjustment
Eliminates sway bar link flex
Allows for neutral sway bar positioning
Maximises all positions on adjustable Sway Bars
Suits lowered or raised vehicles

SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation.

Quantity required: 1

Out of Stock. No longer stocked.

Fitment Difficulty:

Fitting Time: 1hr

PRODUCT RANGES:

SELECT YOUR VEHICLE:

OR, SELECT VEHICLE MANUFACTURER:

You are Viewing