PQ35 VAG Repair Control Arm Bracket and Bush for VW Golf MK5/6, Audi A3, SEAT Leon and Skoda Octavia
A common point of failure on the PQ35 platform vehicles is the bush and bracket on the rear of the front control arms. Due to the design of the OEM suspension, SuperPro were very quick to develop a much improved, performance-enhancing upgrade when the cars first hit the market. However, they've now developed a more affordable service replacement option as well which retains the standard alignment settings of the OEM part but offers a significantly upgraded polyurethane bushing for superior durability and reduced tyre wear. But fear not, SuperPro's unique polyurethane material doesn't increase noise, vibration or harshness like many others on the market - you get all the control - without the downsides. What's more, SuperPro's solution doesn't need the OEM bushes to be pressed out of the OEM brackets and new ones to be pressed back in. Simply unbolt the old brackets and bolt in the new ones.
The part number for the pair of brackets and bushes SPF4952K and is designed for the PQ 35 VAG vehicles such as the Audi A3, VW Golf 5 &6, some Skoda models. As a repair, not performance, part for these vehicles it comes with a pop in bush that is not bonded to the alloy bracket.
These specially formulated polyurethane bushes are the number one repair option for your vehicle. SPF4952K is no different, a replacement lower-inner rear bush and bracket for the front lower control arm with a 95 duro insert.
The brackets and bushes are sold in pairs ready to install, providing the VAG vehicle owners an easy repair solution. This bushing and bracket were developed as a straight replacement for the OE rubber bushing. Should this bush require replacement it is highly recommended that the front bushing is inspected as it is likely that it will also require replacement too. This bushing can also be purchased from SuperPro, SPF3346K is the front bushing in the control arm.
As a repair option SuperPro bushes eliminate the negatives effects that voided, soft or worn rubber bushes have on handling and braking. By replacing your worn out original rubber bushings with SuperPro’s polyurethane option you can count on a quality, long lasting replacement.