×

PRODUCT RANGES:

SELECT YOUR VEHICLE:

OR, SELECT VEHICLE MANUFACTURER:

Improve Directional Stability

Front

1

Steering Rack & Pinion Mount Bush Kit

SPF4660K
Suits Thai Built models (VIN # M for Thailand Models)

Quantity required: 1

Kit Includes: 5 x Polyurethane Bushes, 2 x Steel Tubes

Fitment Difficulty:
Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 2hrs 30mins
Fitting Time icon

Wheel-alignment required after fitment

2

Strut Top Spacer Kit

TRC008-6
Spacer Sleeve, suspension strut mount.

Raises vehicle approximately 10-12mm.

Quantity required: 1

Fitment Difficulty:
Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 3hrs 30mins
Fitting Time icon

Wheel-alignment required after fitment

3

ReadyStrut Top Caps

RS001K
Strut Cap, Spring Seat, Nuts & Washers

Quantity required: 1

4

Upper Control Arm Kit for Lifted Vehicles

A

Fixed Offset

TRC6540
Providing an increase between +2.5 and +3.5 degrees of caster and up to 1.5 degrees of negative camber (depending on height of lift)

Quantity required: 1

Fitment Difficulty:
Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 3hrs
Fitting Time icon

Wheel-alignment required after fitment

B

Adjustable Offset

TRC540
Alignment Correction. Supplied with Camber & Caster Adjustable Ball Joints. Fitted with SuperPro Bushings.

These arms deliver up to 3 degree of caster along with extra camber, allowing for the optimum alignment settings for a 2-inch lifted vehicle. However, it is important to note that a 2-inch block lift does not necessarily translate to a ride height change of 2 inches (in fact, it's likely to be more due to the way it works). The only way to be sure how much your vehicle has been lifted is for the correct measurements to be taken before and after fitting the lift which should be done as a matter of course when doing any suspension work. If you do not know the before and after measurements, you may need the two bushes mentioned below to correct alignment.

Anything in excess of 2-inches of lift we would recommend fitting double-offset bushes (SPF4784XK) and (SPF4786XK) to achieve optimal alignment settings.

Not only do these arms provide for better wheel alignment settings, they have been designed to include increased clearance between the arm and strut at full droop.

Key Features
  • Increased articulation, perfect for the off road environment
  • In-built camber and caster change to suit lifted vehicle
  • Provides for camber and caster adjustment using an adjustable ball joint
  • Increased clearance between spring and Control Arm at full articulation
  • SuperPro Bushings
  • Made in Australia

Quantity required: 1

Kit Includes: 2 x Arms, 2 x Ball Joints, 4 x Polyurethane Bushes, 4 x Steel Tubes

Fitment Difficulty:
Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 3hrs
Fitting Time icon

Wheel-alignment required after fitment

5

Control Arm Lower-Inner Bush Kit

A

Standard Alignment Kit

SPF4785K
Standard replacement

Quantity required: 1

Kit Includes: 4 x Polyurethane Bushes, 4 x Steel Tubes

Fitment Difficulty:
Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 4hrs
Fitting Time icon

Wheel-alignment required after fitment

B

Double-Offset Alignment Kit

SPF4786K
4 x offset bushings & 4 x Standard tubes

Quantity required: 1

Kit Includes: 4 x Polyurethane Bushes, 4 x Steel Tubes

Fitment Difficulty:
Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 4hrs
Fitting Time icon

Wheel-alignment required after fitment

C

Extra Double-Offset Alignment Kit

SPF4786XK
4 x offset bushings & 4 x offset tubes, for use where max adjustment is needed

Quantity required: 1

Kit Includes: 4 x Polyurethane Bushes, 4 x Steel Tubes

Fitment Difficulty:
Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 4hrs
Fitting Time icon

Wheel-alignment required after fitment

6

Control Arm Upper-Inner Bush Kit

A

Standard Alignment Kit

SPF4784K
Standard replacement

Quantity required: 1

Kit Includes: 4 x Polyurethane Bushes, 4 x Steel Tubes

Fitment Difficulty:
Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 4hrs
Fitting Time icon

Wheel-alignment required after fitment

B

Camber-Adjustable Kit

SPF4784XK
Offset tubes to aid in camber adjustment in raised vehicles

Quantity required: 1

Kit Includes: 4 x Polyurethane Bushes, 4 x Steel Tubes

Fitment Difficulty:
Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 4hrs
Fitting Time icon

Wheel-alignment required after fitment

7

Left-Hand Anti-Roll Bar Link

TRC4030L
Standard replacement

Quantity required: 1

Kit Includes: 1 x Link

Fitment Difficulty:
Fitting Difficulty 2 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 30mins
Fitting Time icon

Wheel-alignment required after fitment

8

Right-Hand Anti-Roll Bar Link

TRC4030R
Standard replacement

Quantity required: 1

Kit Includes: 1 x Link

Fitment Difficulty:
Fitting Difficulty 2 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 30mins
Fitting Time icon

Wheel-alignment required after fitment

9

Heavy-Duty Adjustable Anti-Roll Bar Links

TRC1225
Ideal for lifted vehicles. 25mm long Thread. 12mm Ball Joint Adjustable Link. Min length 75mm, max length 85mm

Quantity required: 1

Kit Includes: 2 x Links

Fitment Difficulty:
Fitting Difficulty 2 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 1hr
Fitting Time icon

Rear

10

Greaseable Shackle, Pin and Bush Kit

KIT0211SK
Contains Greasable Shackles and Fixed Pins with all SuperPro Bushings
The Shackles and Fixed Pins are often overlooked when upgrading the suspension of a 4WD.
Original shackles and fixed pins corrode and destroy the bushings and it is the leaf spring bushings that stabilise the movement of the rear axle.
Worn or inferior bushes in this area will cause the solid rear axle to move and impart rear end passive steer to the vehicle leading to the vehicle 'wandering' all over the road and be unstable under heavy braking.
This can be especially noticeable carrying a load or towing a boat or caravan.
By fitting the complete package of Greasable Shackles, Fixed Pins and Bush Kit the rear end of any 4WD will handle just about anything that is throw at it!

Quantity required: 1

Fitment Difficulty:
Fitting Difficulty 2 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 2hrs
Fitting Time icon

Wheel-alignment required after fitment

11

Complete Rear Leaf Spring Bush Kit

KIT0211K
These bushings are often overlooked when upgrading the suspension of a 4WD.
Leaf spring bushings stabilise the movement of the rear axle, inferior bushes in this area will cause the solid rear axle to move and impart rear end passive steer to the vehicle.
It also causes the vehicle to "wander" all over the road and be unstable under heavy braking.
This can be especially noticeable carrying a load or towing a boat or caravan.
The OE rubber style bushes are designed to work at standard height with standard tyres and with standard loads.
By fitting SuperPro Bushings and upgrading to Greaseable Shackles the rear end of your 4WD will handle just about anything you can throw at it!

Quantity required: 1

Fitment Difficulty:
Fitting Difficulty 2 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 2hrs
Fitting Time icon

Wheel-alignment required after fitment

12

Greaseable Pin and Bush Kit (Front Spring Eyes)

SPF4461K

Quantity required: 1

Kit Includes: 4 x Polyurethane Bushes, 2 x Steel Tubes, 2 x Plates

13

Spring Front Eye Bush Kit

SPF2766K
See special instruction sheet included in kit at fitment stage.

Quantity required: 1

Kit Includes: 4 x Polyurethane Bushes, 2 x Steel Tubes

Fitment Difficulty:
Fitting Difficulty 2 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 2hrs
Fitting Time icon

Wheel-alignment required after fitment

14

Spring Rear Eye Bush Kit

SPF2767K

Quantity required: 1

Kit Includes: 4 x Polyurethane Bushes

Fitment Difficulty:
Fitting Difficulty 2 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 2hrs
Fitting Time icon

Wheel-alignment required after fitment

15

22mm Heavy Duty 3 Position Blade Adjustable Anti-Roll Bar

RC0080RZ-22
Anti-Roll Bar Kit includes Adjustable Anti-Roll Bar Links and D-Bushes

Quantity required: 1

Kit Includes: 1 x Anti-Roll Bar, 2 x Polyurethane Bushes, 2 x Links

Fitment Difficulty:
Fitting Difficulty 2 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 1hr 30mins
Fitting Time icon

16

Anti-Roll Bar Link Kit

A

Cut-To-Length

TRC4007

Quantity required: 2

Kit Includes: 1 x Link

Fitment Difficulty:
Fitting Difficulty 1 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 30mins
Fitting Time icon

B

Heavy-Duty-Adjustable

TRC12200
12mm Ball Joint Adjustable Link

Quantity required: 1

Kit Includes: 2 x Links

Fitment Difficulty:
Fitting Difficulty 2 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 1hr
Fitting Time icon

C

Quick-Release Anti-Roll Bar Links - Heavy Duty Extended

TRC4304
SuperPro's heavy-duty extended thread sway bar links are designed and manufactured to suit lifted Vehicles from 2-8 inches.

They are designed to allow you to effectively trim the anti-roll bar links to your desired length to provide adequate tail shaft clearance and anti-roll bar alignment.

Manufactured from a heavy-duty 16mm rod our anti-roll bar links offer increased strength and stud articulation, providing for less stress on the anti-roll bar links during wheel articulation.

Quantity required: 2

Kit Includes: 1 x Link

Fitment Difficulty:
Fitting Difficulty 1 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 30mins
Fitting Time icon

Related News

Contact your nearest 4X4 specialist

Back to Top