Abarth
Alfa Romeo
Asia Motors
Aston Martin
Audi
Austin
Austin-Healey
Bentley
BMW
Chevrolet
Chrysler
Citroen
Daewoo
Daihatsu
Daimler
DMC
Dodge
Ferrari
Fiat
Ford
Ginetta
Hillman
Holden
Honda
Hummer
Hyundai
Indigo
Infiniti
Isuzu
Jaguar
Jeep
Jensen
Kia
Lancia
Land Rover
LDV
Lexus
Lotus
Mahindra
Maserati
Mazda
Mercedes-Benz
MG
Mini
Mitsubishi
Morris
Nissan
Noble
Opel
Peugeot
Porsche
Proton
Reliant
Renault
Rootes Group
Rover
Saab
Seat
Singer
Skoda
Smart
Ssangyong
Subaru
Sunbeam
Suzuki
Talbot
Tata
Tesla
Toyota
Triumph
TVR
Vauxhall
Volkswagen
Volvo
My steering is soo much sharper!
Front & Rear Control Arm and Anti-Roll Bar Bush Kit
KIT5189K
Type R Models Only - Kit Includes: 1xSPF2308K, 1xSPF2183-24K, 1xSPF2318K, 1xSPF3195K, 1xSPF2311K, 1xSPF2184-19K
Front & Rear Control Arm Bush Kit
KIT5189K-RG
Type R Models Only - Kit Includes: 1xSPF2308K, 1xSPF2318K, 1xSPF3195K, 1xSPF2311K
Bump Steer Correction Kit
KCA517
The Whiteline bump steer kit is designed to change bump steer characteristics depending on driving conditions. For racing, reducing the amount of bump steer is beneficial to give a more positive feel - sharper handling - reduced understeer.
Roll Centre Correction Kit
KCA520
A must for lowered vehicles, Whiteline roll centre correction kit, is designed to correct roll-centre geometry using specially engineered ball-joints. Raising the front roll-centre results in a substantial increase to front roll resistance and a significant reduction in suspension compression on the outside front tyre during cornering. The result is more even weight distribution and improved tyre contact ultimately improving front end grip, cornering speeds and tyre life when driving the vehicle to its potential.
27mm Front Anti-Roll Bar Kit
RC0075FZ-27Fits European-spec EP3 vehicles but not JDM cars or cars fitted with JDM manifold/downpipes.
Quantity required: 1
Only 3 Left In Stock...Hurry!
For immediate despatch.
Fitment Difficulty:
6
Control Arm Inner-Front & Rear Bush Kit
Standard Alignment Kit
SPF2306K
Retains standard alignment settings
Quantity required: 1
Only 3 Left In Stock...Hurry!
For immediate despatch.
Kit Includes: 4 x Steel Tubes, 2 x Sleeves, 1 x Instruction Sheet, 10 x Polyurethane Bushes
Caster Increase Kit
SPF2308K
Increases caster to increase steering weight, precision and sharpen turn-in.
Quantity required: 1
Next Stock Due 06 September 2024
Pre-order now be ensure you get yours.
Kit Includes: 4 x Steel Tubes, 2 x Sleeves, 10 x Polyurethane Bushes
Anti-Roll Bar Mount To Chassis Bush
SPF2183-24K
To fit standard 24mm Bar. Measure bar diameter 20,22,23 & 24mm available
Quantity required: 1
Next Stock Due 06 September 2024
Pre-order now be ensure you get yours.
24mm Rear Anti-Roll Bar Upgrade
BHR67Z
24mm 2-point adjustable rear anti-roll bar made from solid spring steel with Whiteline's top-quality coating for long life.
3-year warranty and comes with both D-bushes for mounting.
3-year warranty and comes with both D-bushes for mounting.
26mm Rear Anti-Roll Bar Upgrade (Motorsport)
BHR67XZ
26mm 3-position adjustable rear anti-roll bar upgrade for motorsport use. Supplied with D-bushes, saddles and lateral locks for secure fitment.
Made from solid spring steel with Whiteline's top-quality coating for long service life. 3-Year / 60,000kms warranty.
Made from solid spring steel with Whiteline's top-quality coating for long service life. 3-Year / 60,000kms warranty.
Camber-Adjustable Rear Upper Control Arms
KTA333
Heavy-duty control arms provide on-car adjustability of camber alignment. This results in improved traction, increased cornering grip and better tyre life - ultimately improving overall performance.
Control Arm Lower-Inner Rear Bush
SPF2318K
Quantity required: 1
In Stock
For immediate despatch.
Kit Includes: 2 x Polyurethane Bushes, 2 x Steel Tubes, 2 x Sleeves
Control Arm Lower-Outer Bush
SPF3195K
Type R Models - To suit 2x12mm & 2x14mm Diameter bolts
Quantity required: 1
Next Stock Due 06 September 2024
Pre-order now be ensure you get yours.
Kit Includes: 8 x Polyurethane Bushes, 4 x Steel Tubes
13
Control Arm Upper-Outer Bush
Standard Alignment Kit
SPF2310K
Standard settings
Quantity required: 1
Next Stock Due 14 August 2024
Pre-order now be ensure you get yours.
Kit Includes: 2 x Polyurethane Bushes, 2 x Steel Tubes
Camber-Adjustable Kit
SPF2311K
Adjustable Camber {Increase or Decrease by 1.75 degrees range}
Quantity required: 1
In Stock
For immediate despatch.
Kit Includes: 2 x Steel Tubes, 2 x Polyurethane Bushes
Anti-Roll Bar Mount To Chassis Bush
SPF2184-19K
To fit standard 19mm bar. Measure bar diameter 19, 22 & 24mm available
22mm Rear Anti-Roll Bar Kit
RC0075R-22Fits European-spec EP3 vehicles but not JDM cars
Quantity required: 1
Only 2 Left In Stock...Hurry!
For immediate despatch.
Fitment Difficulty:
Heavy-Duty Adjustable Anti-Roll Bar Links
TRC1025
10mm Ball Joint Adjustable Link
Minimum Length 75 mm - Maximum Length 85 mm
Minimum Length 75 mm - Maximum Length 85 mm
Quantity required: 1
Next Stock Due 14 June 2024
Pre-order now be ensure you get yours.
Kit Includes: 2 x Links
Fitment Difficulty:
Fitting Time: 1hr
Related News
- Front Control Arm replacement kit for the 2016 and later Honda Civic FK (Product News)
- Honda Civic EK Series SuperPro Bush Kits (Product News)
- Front Control Arm Bush Kit for the Honda Civic EP3, Integra DC5 and CR-V (Product News)