×

PRODUCT RANGES:

SELECT YOUR VEHICLE:

OR, SELECT VEHICLE MANUFACTURER:

Improve Directional Stability

Engine Bay

1

Engine Front Torque Arm

KDT974
The torque arm assists in controlling the engine and drivetrain forward and aft twisting motion. The torque arm is inherently soft due to the high compliance rubber bushing design and was built for comfort and not responsiveness or feel. Whiteline's torque arm mount bushing is built to handle the demands of high torque and power output engines by limiting the amount of movement the engine and drivetrain will place upon the pitch stop. Utilising low compliance bushing technology this eliminates the slop, twisting and shudder found in the OEM rubber bushings allowing for a faster, positive, responsive feel of power delivery on and off the throttle.

Quantity required: 1

In Stock

For immediate despatch.

2

Engine Mount Insert Kit

SPF3981K
The insert fits into the voids of the original mounting bush and takes out some of the engine movement under acceleration and deceleration. This results in reduced stress on associated components (such as the exhaust system). Our insert has been caresfully developed to give greater control without introducing Noise, Vibration and Harshness into the cabin. Focus RS and ST Only

Quantity required: 1

Only 3 Left In Stock...Hurry!

For immediate despatch.

Kit Includes: 1 x Polyurethane Bush

Front and Rear

3

Front and Rear Anti-Roll Bar Upgrade Kit

BFK003
Everything you need to 'Activate More Grip'.

Contains BMF51X, BMR78XZ, KLC151 and KLC157.

Engineered to 'Activate More Grip', BFK003 is a packaged solution designed to improve performance and enhance the driving experience of your vehicle. Boasting a 24mm front Anti-Roll bar and 24mm 2-point adjustable rear Anti-Roll bar, the kit is completed with high-quality Anti-Roll bar links and mounting accessories that ensure optimum performance and ease of installation. Achieve perfect balance and precise tuning with this Whiteline Anti-Roll Bar Kit.

Quantity required: 1

In Stock

For immediate despatch.

4

Front And Rear Suspension Bush Kit

A

Standard Alignment

KIT0169K
Kit Includes: 1X SPF3315K, 1XSPF3368K, 1 x SPF3466K, 1X SPF2323K, 1X SPF2324K, 2X SPF2325K.

Quantity required: 1

Out of Stock

Contact us for availability.

B

Caster & Camber Adjustable

KIT0170K
Kit Includes: 1X SPF3315K, 1XSPF3370K, 1 x SPF3466K, 1X SPF2323K, 1X SPF2324K, 2X SPF2326K.

Quantity required: 1

Out of Stock

Contact us for availability.

Front

5

Control Arm Bush Kit

A

Standard Alignment Kit

KIT0171K
Kit Includes: 1xSPF3368K, 1xSPF3115K

Quantity required: 1

Only 4 Left In Stock...Hurry!

For immediate despatch.

B

Performance Alignment Kit

KIT0171CADJK
No Photo Available
Kit Includes: 1xSPF3370K, 1xSPF3115K

Quantity required: 1

Only 3 Left In Stock...Hurry!

For immediate despatch.

6

Anti-Lift Kit - Front Wishbone Control arm lower inner rear bushing - Ford/Mazda/Volvo

KCA428
Important Notes: Adds +0.5deg caster + Anti-Lift.

Whiteline Anti Lift Kits are primarily designed to improve traction and cornering grip under power. By increasing static caster and improving front-end geometry, the new alloy mounts coupled with low-compliance synthetic elastomer bushings dramatically sharpen initial turn-in response and reduce understeer.

Quantity required: 1

Only 3 Left In Stock...Hurry!

For immediate despatch.

7

24mm Extra-Heavy-Duty Front Anti-Roll Bar Upgrade

BMF51X
Important Notes: 24mm - non-adjustable - TUV certified.

Engineered to 'Activate More Grip', Anti-Roll bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tyres, increasing cornering grip and improving outright performance. This Whiteline 24mm fixed position Anti-Roll bar = more grip = better handling = outright performance - it's the best dollar-for-dollar handling improvement you can make to your vehicle. In fact, benefits extend to handling, safety and tyre wear improvements without affecting ride quality or comfort.

Quantity required: 1

In Stock

For immediate despatch.

8

Adjustable Front Anti-Roll Bar Links

KLC151
Suits models with 300mm link - adjustable extra heavy duty.

Not many enthusiasts are aware that OE and, more importantly, aftermarket Anti-Roll bar effectiveness can be hindered by worn or inadequate mounts, drop links and lateral stoppers. Whiteline adjustable Anti-Roll bar links are engineered to be up to the task with top spec, lightweight componentry combined with a window of adjustability, eliminating Anti-Roll bar preload on installation but, most importantly, ensuring the maximum output of the Anti-Roll bar for improved grip and better handling.

Quantity required: 1

In Stock

For immediate despatch.

9

Front Steering bump steer correction kit

KCA405
Important Notes: Reduces factory toe out from 6mm to 1mm (at 60mm bump)

Whiteline bump steer kit is designed to change bump steer characteristics depending on driving conditions. For racing, it is beneficial to reduce the amount of bump steer to give a more positive feel - sharper handling - reduced rear passive steer, and reduce understeer.

Quantity required: 1

Only 1 Left In Stock...Hurry!

For immediate despatch.

10

Complete Front Control Arm Kit

A

18mm Ball Joints - Up to Feb 2006

TRC1135
This front lower control arm kit has been designed to be an easy repair solution.

Offering both alignment and vehicle handling improvements. Designed not just as a repair solution but as an upgrade.

Supplied as a complete kit and fully assembled with special uprated ball joints and proprietary SuperPro bushings. We have made TRC1135 by far the best choice on the market.

The Ford Focus MK2 front control arms were changed by the manufacturer around February 2006. Vehicles made prior to this will most likely have 18mm ball joints which the TRC1135 is designed to replace. However, we recommend measuring your ball joints to make sure you order the correct ones. Vehicles made after February 2006 are likely to feature larger 21mm ball joints so you would need to fit TRC1136 instead.

Quantity required: 1

In Stock

For immediate despatch.

Fitment Difficulty:
Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 2hrs
Fitting Time icon

Wheel-alignment required after fitment

B

21mm Ball Joints - After March 2006

TRC1136
This front lower control arm kit has been designed to be an easy repair solution.

Offering both alignment and vehicle handling improvements. Designed not just as a repair solution but as an upgrade.

Supplied as a complete kit and fully assembled with special uprated ball joints and proprietary SuperPro bushings. We have made TRC1135 by far the best choice on the market.

The Ford Focus MK2 front control arms were changed by the manufacturer around February 2006. Vehicles made prior to this will most likely have 18mm ball joints which the TRC1135 is designed to replace. However, we recommend measuring your ball joints to make sure you order the correct ones. Vehicles made after February 2006 are likely to feature larger 21mm ball joints so you would need to fit TRC1136 instead.

Quantity required: 1

In Stock

For immediate despatch.

Fitment Difficulty:
Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 2hrs
Fitting Time icon

Wheel-alignment required after fitment

11

Control Arm Lower-Inner Front Bush Kit

A

12mm Bolt

SPF2137K
12mm Bolt

Quantity required: 1

In Stock

For immediate despatch.

Kit Includes: 4 x Polyurethane Bushes, 2 x Steel Tubes

B

14mm Bolt

SPF3115K
14mm Bolt

Quantity required: 1

In Stock

For immediate despatch.

Kit Includes: 2 x Steel Tubes, 4 x Polyurethane Bushes

12

Control Arm Lower-Inner Rear Bush

A

Standard Alignment Settings

SPF3368K
Standard replacement - fits OEM bracket. If the original bracket is in poor condition or shows any evidence of stretching SPF4653K which includes a replacement bracket should be used.

Quantity required: 1

In Stock

For immediate despatch.

Kit Includes: 2 x Steel Tubes, 1 x Instruction Sheet, 2 x Washer(s) - used for Steel and / or Polyurethane, 2 x Sleeves, 2 x Polyurethane Bushes

B

Standard Alignment Settings with Bracket and Bolts

SPF4653K
Standard replacement. Offers quicker and easier fitment and is a solution when OEM brackets are stretched or in poor condition.

Quantity required: 1

Only 3 Left In Stock...Hurry!

For immediate despatch.

Kit Includes: 2 x Brackets

C

Steering-Pull Correction Kit

SPF3369K
1 x Offset 1 x Standard Bushings; Approx 0.5 Degree Caster change

Quantity required: 1

Out of Stock

Contact us for availability.

Kit Includes: 2 x Polyurethane Bushes, 2 x Sleeves, 2 x Washer(s) - used for Steel and / or Polyurethane, 1 x Instruction Sheet, 2 x Steel Tubes

D

Performance Alignment Correction Kit

SPF3370K
2 x Offset Bushings; Approx 0.5 Degree Caster change per bush

Quantity required: 1

Only 3 Left In Stock...Hurry!

For immediate despatch.

Kit Includes: 2 x Steel Tubes, 1 x Instruction Sheet, 2 x Washer(s) - used for Steel and / or Polyurethane, 2 x Sleeves, 2 x Polyurethane Bushes

13

Anti-Roll Bar Mount To Chassis Bush

A

To Fit OE Bar

SPF3114-20K
OE bar with flats at bush mounting point

Quantity required: 1

Out of Stock

Contact us for availability.

B

To Fit Aftermarket Round Bars

SPF2141-21K
Suits 21mm aftermarket round bar. Measure bar diameter. 20 and 22mm options are also available (SPF2141-20K or SPF2141-22K)

Quantity required: 1

Only 1 Left In Stock...Hurry!

For immediate despatch.

Kit Includes: 2 x Polyurethane Bushes

14

Anti-Roll Bar Link Kit

A

Cut-To-Length Link

TRC4004
10mm Ball Joint. Minimum length 80mm - maximum length 320mm

Quantity required: 2

Only 1 Left In Stock...Hurry!

For immediate despatch.

Kit Includes: 1 x Link

Fitment Difficulty:
Fitting Difficulty 1 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 30mins
Fitting Time icon

B

Anti-Roll Bar Link

TRC4025
Standard Replacement10mm Ball Joint Link 180 Degree opposed Length 300 mm center to center

Quantity required: 2

In Stock

For immediate despatch.

Kit Includes: 1 x Link

Fitment Difficulty:
Fitting Difficulty 1 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 30mins
Fitting Time icon

C

Heavy-Duty Adjustable

TRC10200
10mm Ball Joint Adjustable Link. Minimum Length 245mm. Maximum Length 305mm. OE length 270mm

Quantity required: 1

Out of Stock

Contact us for availability.

Kit Includes: 2 x Links

Fitment Difficulty:
Fitting Difficulty 2 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 1hr
Fitting Time icon

Rear

15

24mm Adjustable Rear Anti-Roll Bar

BMR78XZ
Important Notes: 24mm - 2 point adjustable - TUV certified

Engineered to 'Activate More Grip', Anti-Roll bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tires, increasing cornering grip and improving outright performance. This Whiteline 24mm 2-point adjustable Anti-Roll bar = more grip = better handling = outright performance - it's the best dollar-for-dollar handling improvement you can make to your vehicle. In fact, benefits extend to handling, safety and tyre wear improvements without affecting ride quality or comfort.

Quantity required: 1

In Stock

For immediate despatch.

16

Rear Anti-Roll Bar Link Kit

KLC157
Not many enthusiasts are aware that OE and, more importantly, aftermarket Anti-Roll bar effectiveness can be hindered by worn or inadequate mounts, drop links and lateral stoppers. Whiteline adjustable Anti-Roll bar links are engineered to be up to the task with top spec, lightweight componentry combined with a window of adjustability, eliminating Anti-Roll bar preload on installation but most importantly ensuring the maximum output of the Anti-Roll bar for improved grip and better handling.

Quantity required: 1

In Stock

For immediate despatch.

17

Rear - Lower Front Control Arms

KTA137
Heavy-duty adjustable alloy rear lower front control arms are designed to allow for increased range with easy on-car toe adjustment. Low-compliance bushings are used to minimise NVH and maximise longevity.

Quantity required: 1

Only 1 Left In Stock...Hurry!

For immediate despatch.

18

Adjustable Control Arm Upper Rear

KTA138A
Heavy-duty control arms provide on-car adjustability of camber alignment. This results in improved traction, increased cornering grip and better tyre life - ultimately improving overall performance.

Quantity required: 1

Only 1 Left In Stock...Hurry!

For immediate despatch.

19

Rear Control arms - Lower Front Arms

WA401
Important Notes: Supplied as a single arm so you will need to order two. Complete arm fitted with bushings.

Most would agree that the time and stress to remove and replace bushings and ball joints to suspension arms can be hard to justify. Making up press tools and damaging arms are just two of the problems one can endure. Why put yourself through it when you can purchase complete arms, fitted with market leading Whiteline synthetic elastomer bushings.

Quantity required: 2

In Stock

For immediate despatch.

20

Rear Control Arms - Upper Arms

WA402
Most would agree that the time and stress to remove and replace bushings and ball joints to suspension arms can be hard to justify. Making up press tools and damaging arms are just two problems one can endure. Why put yourself through it when you can purchase complete arms, fitted with market-leading Whiteline synthetic elastomer bushings.

Quantity required: 2

In Stock

For immediate despatch.

21

Blade Trailing Arm Front Bush

SPF3466K
Do not remove original shell

Quantity required: 1

Only 3 Left In Stock...Hurry!

For immediate despatch.

Kit Includes: 2 x Polyurethane Bushes, 1 x Instruction Sheet, 2 x Steel Tubes

22

Toe Control Arm Lower-Inner & Outer Bush Kit

SPF2323K
Front Arm Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life. SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution.

Quantity required: 1

Next Stock Due 14 August 2024

Pre-order now be ensure you get yours.

Kit Includes: 4 x Polyurethane Bushes, 4 x Steel Tubes

23

Control Arm Lower Inner and Outer Bush

SPF2324K
Rear Arm. Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations.
Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution.

Quantity required: 1

Only 3 Left In Stock...Hurry!

For immediate despatch.

Kit Includes: 4 x Sleeves, 4 x Steel Tubes, 4 x Polyurethane Bushes

24

Control Arm Upper-Inner Bush Kit

A

Standard Alignment Kit

SPF2325K
Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations.
Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution.

Quantity required: 1

Next Stock Due 14 August 2024

Pre-order now be ensure you get yours.

Kit Includes: 2 x Polyurethane Bushes, 2 x Steel Tubes, 2 x Sleeves

B

Performance Alignment Kit

SPF2326K
1 Degree of camber adjustment. To be used in this position when SPF2326K is already used in the outer position and 2 Degrees Camber adjustment in total required

Quantity required: 1

In Stock

For immediate despatch.

Kit Includes: 2 x Sleeves, 2 x Steel Tubes, 2 x Polyurethane Bushes

25

Control Arm Upper-Outer Bush Kit

A

Standard Alignment Kit

SPF2325K
Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations.
Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution.

Quantity required: 1

Next Stock Due 14 August 2024

Pre-order now be ensure you get yours.

Kit Includes: 2 x Polyurethane Bushes, 2 x Steel Tubes, 2 x Sleeves

B

Performance Alignment Kit

SPF2326K
Prefered Position to gain 1 Degree Camber change. A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.

Quantity required: 1

In Stock

For immediate despatch.

Kit Includes: 2 x Sleeves, 2 x Steel Tubes, 2 x Polyurethane Bushes

26

Anti-Roll Bar Mount To Chassis Bush

A

To Fit OE Bar

SPF2578K
No Photo Available
OE bar with flats at bush mounting point

Quantity required: 1

Only 2 Left In Stock...Hurry!

For immediate despatch.

Kit Includes: 4 x Polyurethane Bushes

B

To Fit Aftermarket Round Bars

SPF2141-21K
Suits 21mm aftermarket round bar. Measure bar diameter. 20 and 22mm available (SPF2141-20K or SPF2141-22K)

Quantity required: 1

Only 1 Left In Stock...Hurry!

For immediate despatch.

Kit Includes: 2 x Polyurethane Bushes

27

Anti-Roll Bar Link Kit

TRC4002
Standard Replacement. 10mm Horizontal Ball Joint Link with 10mm Vertical Ball Joint. Length 76-86mm center to center

Quantity required: 2

Out of Stock

Contact us for availability.

Kit Includes: 1 x Link

Fitment Difficulty:
Fitting Difficulty 1 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 30mins
Fitting Time icon

Related News

Contact your nearest Ford Focus specialist

Back to Top