Improve Directional Stability
25mm Suspension Enhancement Lift Kit
AMAR-0010-300kg constant load.
Kit Contains 4 x Bilstein shock absorbers. Front springs are 2 x King Springs. Rear Springs are 2 x Formula Leafs. The kit also comes with 4 x U Bolts, 2 x Drive Shaft Bolt Kits and a SuperPro Spring & Shackle Bush Kit.
- BILSTEIN gas-pressure technology provides maximum traction, precise handling and safety
- Patented digressive valving instantly reacts to changing surface conditions
- Optimum grip and enhanced lane stability in day to day and extreme situations
- Proven in harsh Australian outback conditions
- Repairable & Revalveable
- OEM certified mounting hardware allows for easy installation
- Restores original ride characteristic
- Individually fine-tuned during BILSTEIN road testing
- Enhanced safety
- Precision handling for optimised vehicle control
- Constant damping power under any load
- 3 year / 60,000km warranty
Please note: This kit's default rear spring rate has been specifically designed for use on vehicles that have no constant load. Matching spring rates with your vehicle's weight is critical to performance. If you are unsure of your vehicles rear load or the spring rate you require then please contact us to make sure you get the right spring rate.
**Important Note** - The Front Drive Shafts need to be removed to fit the front shock absorbers in this kit. VW have designed the driveshaft bolts (OEM Part No. N90625101 - or order TRC3318 below) to be for one-time use only and they need to be replaced, then torqued to the following settings: Outer CV Bolt 150Nm + 180 Degrees Inner CV Bolts 50Nm + 90 Degrees.
Drive Shaft Bolt Kit
TRC3318OEM Part Number: N90625101
Quantity required: 2
Only 2 Left In Stock...Hurry!
For immediate despatch.
Kit Includes: 6 x Bolts
30mm Heavy Duty 2 Position Blade Adjustable Anti-Roll Bar
RC0058FZ-30Quantity required: 1
Next Stock Due 14 June 2024
Pre-order now be ensure you get yours.
Kit Includes: 1 x Anti-Roll Bar, 2 x Polyurethane Bushes
Anti-Roll Bar Mount Bush Kit
SPF3869-27KQuantity required: 1
In Stock
For immediate despatch.
Wheel-alignment required after fitment
Upper Control Arms
TRC6630Quantity required: 1
Only 2 Left In Stock...Hurry!
For immediate despatch.
Wheel-alignment required after fitment
Control Arm Lower-Front Bush Kit
Standard Duty
SPF3870KOEM Part Number: 7H0 407 183
OEM Housing Part: 7E0407151 B & 7E0407152B
Quantity required: 1
In Stock
For immediate despatch.
Kit Includes: 2 x Polyurethane Bushes, 2 x Steel Tubes
Wheel-alignment required after fitment
Heavy Duty
SPF3870-90KOEM Part Number: 7H0 407 183
OEM Housing Part: 7E0407151 B & 7E0407152B
Quantity required: 1
Next Stock Due 31 May 2024
Pre-order now be ensure you get yours.
Wheel-alignment required after fitment
Control Arm Lower-Rear Bush Kit
Standard Replacement
SPF3871KQuantity required: 1
In Stock
For immediate despatch.
Kit Includes: 2 x Polyurethane Bushes, 2 x Steel Tubes
Wheel-alignment required after fitment
Double Offset
SPF3875KQuantity required: 1
In Stock
For immediate despatch.
Kit Includes: 2 x Polyurethane Bushes, 2 x Steel Tubes
Wheel-alignment required after fitment
Control Arm Upper-Inner Bush Kit
Standard Replacement
SPF3873KQuantity required: 1
In Stock
For immediate despatch.
Kit Includes: 4 x Polyurethane Bushes, 4 x Steel Tubes
Wheel-alignment required after fitment
Offset
SPF3873XKQuantity required: 1
In Stock
For immediate despatch.
Kit Includes: 4 x Polyurethane Bushes, 2 x Steel Tubes
Wheel-alignment required after fitment
Steering Rack & Pinion Mount Bush Kit
SPF4463KQuantity required: 1
Next Stock Due 05 July 2024
Pre-order now be ensure you get yours.
Kit Includes: 4 x Polyurethane Bushes, 2 x Steel Tubes
Wheel-alignment required after fitment
24mm Heavy Duty 3 Position Blade Adjustable Anti-Roll Bar
RC0058RZ-24Quantity required: 1
In Stock
For immediate despatch.
Kit Includes: 1 x Anti-Roll Bar, 2 x Polyurethane Bushes, 1 x Fitting Kit
Complete Rear Leaf Spring Bush Kit
KIT0183KThese bushings are often overlooked when upgrading the suspension of a 4WD.
Leaf spring bushings stabilise the movement of the rear axle, inferior bushes in this area will cause the solid rear axle to move and impart rear end passive steer to the vehicle.
It also causes the vehicle to "wander" all over the road and be unstable under heavy braking.
This can be especially noticeable carrying a load or towing a boat or caravan.
The OE rubber style bushes are designed to work at standard height with standard tyres and with standard loads.
By fitting SuperPro Bushings and upgrading to Greaseable Shackles the rear end of your 4WD will handle just about anything you can throw at it!
Quantity required: 1
Out of Stock
Contact us for availability.
Wheel-alignment required after fitment
Leaf Spring Rear Lower Bush Kit
SPF3715KOEM Part Number: 2H0.511.414
Quantity required: 1
In Stock
For immediate despatch.
Kit Includes: 1 x
Leaf Spring Front Eye Bush Kit
SPF3716KOEM Part Number: 2H0.511.413
Quantity required: 1
Only 1 Left In Stock...Hurry!
For immediate despatch.
Kit Includes: 1 x
Leaf Spring Shackle Upper Bush Kit
SPF3745KQuantity required: 1
In Stock
For immediate despatch.
Kit Includes: 8 x Polyurethane Bushes, 2 x Steel Tubes
Related News
- VAG MQB Standard and Offset Lower Control Arm Assembly Kits (Product News)
- Volkswagen Amarok and Porsche Cayenne 955 Replacement Steering Rack Mount Bushes (Product News)
- Have you lowered your VW T5 or T6 and now suffering from excessive or uneven tyre wear on the rear? (Product News)
- Overhauling a 2011 Volkswagen Passat to feel like new (Product News)
- Volkswagen Driver magazine tries out SuperPro's handling package (Product News)
- SuperPro wins 'Best Dub Product 2010' Award (General News)