Abarth
Alfa Romeo
Asia Motors
Aston Martin
Audi
Austin
Austin-Healey
Bentley
BMW
Chevrolet
Chrysler
Citroen
Daewoo
Daihatsu
Daimler
DMC
Dodge
Ferrari
Fiat
Ford
Ginetta
Hillman
Holden
Honda
Hummer
Hyundai
Indigo
Infiniti
Isuzu
Jaguar
Jeep
Jensen
Kia
Lancia
Land Rover
LDV
Lexus
Lotus
Mahindra
Maserati
Mazda
Mercedes-Benz
MG
Mini
Mitsubishi
Morris
Nissan
Noble
Opel
Peugeot
Porsche
Proton
Reliant
Renault
Rootes Group
Rover
Saab
Seat
Singer
Skoda
Smart
Ssangyong
Subaru
Sunbeam
Suzuki
Talbot
Tata
Tesla
Toyota
Triumph
TVR
Vauxhall
Volkswagen
Volvo
Reduce Tyre Wear
Control Arm Assembly Kit
TRC1020
Left and Right Arms for Standard Replacement and Repair Upgrade
standard replacement
SuperPro arm kits offer the ideal repair and repair upgrade option.
The common failure point in the arm as fitted to these vehicles is the vertical pivot bushing in the rear position.
This bushing controls braking stability and wheel alignment.
Installing the SuperPro spherical style bushing gives handling and braking enhancements.
The front crossbar bushing maintains a similar material to O.E to help absorb unwanted noise transfer along the arm.
With the superior SuperPro rear position bushing, the wear and side twist load on the front position is reduced leading to increased durability.
SuperPro Tip
Designed and packaged to be replaced as a pair.
SuperPro maintains it is critical for a pair to installed to any application at the same time to avoid any detrimental handling and braking characteristics from a mismatch of bushing material.
standard replacement
SuperPro arm kits offer the ideal repair and repair upgrade option.
The common failure point in the arm as fitted to these vehicles is the vertical pivot bushing in the rear position.
This bushing controls braking stability and wheel alignment.
Installing the SuperPro spherical style bushing gives handling and braking enhancements.
The front crossbar bushing maintains a similar material to O.E to help absorb unwanted noise transfer along the arm.
With the superior SuperPro rear position bushing, the wear and side twist load on the front position is reduced leading to increased durability.
SuperPro Tip
Designed and packaged to be replaced as a pair.
SuperPro maintains it is critical for a pair to installed to any application at the same time to avoid any detrimental handling and braking characteristics from a mismatch of bushing material.
Quantity required: 1
Only 2 Left In Stock...Hurry!
For immediate despatch.
Kit Includes: 2 x Arms
Fitting Time: 2hrs 30mins
Control Arm Lower-Inner Front Bush Kit
SPF4099K
Quantity required: 1
Out of Stock
Contact us for availability.
Kit Includes: 4 x Polyurethane Bushes
Fitting Time: 1hr
3
Control Arm Lower-Inner Rear Bush Kit
Standard Alignment Kit
SPF2902K
Standard replacement kit
Quantity required: 1
Out of Stock
Contact us for availability.
Kit Includes: 6 x Polyurethane Bushes, 2 x Sleeves, 2 x Steel Tubes
Fitting Time: 2hrs 30mins
Performance Alignment Kit
SPF2904K
Alignment CorrectionA Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results!
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results!
Quantity required: 1
Out of Stock
Contact us for availability.
Kit Includes: 6 x Polyurethane Bushes, 2 x Sleeves, 2 x Steel Tubes
Fitting Time: 2hrs 30mins
Steering-Pull Correction Kit
SPF2903K
Alignment Correction
0.5 Degree Caster Adjustment available
Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturers specifications.
Supplied with an offset bush to be fitted to the passenger side and a standard bush for the drivers side, these kits stagger the caster or setback by re-positioning the ball joint slightly forward in the chassis.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics.
Follow the installation instructions and the problem is solved.
0.5 Degree Caster Adjustment available
Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturers specifications.
Supplied with an offset bush to be fitted to the passenger side and a standard bush for the drivers side, these kits stagger the caster or setback by re-positioning the ball joint slightly forward in the chassis.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics.
Follow the installation instructions and the problem is solved.
Quantity required: 1
Out of Stock
Contact us for availability.
Kit Includes: 2 x Steel Tubes, 2 x Sleeves, 6 x Polyurethane Bushes
Fitting Time: 2hrs 30mins
Steering Rack & Pinion Mount Bush (Power Steering)
SPF3431K
Quantity required: 1
Only 4 Left In Stock...Hurry!
For immediate despatch.
Kit Includes: 4 x Polyurethane Bushes, 4 x Washer(s) - used for Steel and / or Polyurethane, 2 x Steel Tubes
Fitting Time: 3hrs
Anti-Roll Bar Link Kit - Heavy Duty Adjustable
TRC12200
12mm Ball Joint Adjustable Link
Minimum Length 254 mm - Maximum Length 305 mm
Designed to maximise the benefit of Roll Control Adjustable Anti-Roll Bars and be used in place of that hard to find O.E link.
Features & Benefits
Minimum Length 254 mm - Maximum Length 305 mm
Designed to maximise the benefit of Roll Control Adjustable Anti-Roll Bars and be used in place of that hard to find O.E link.
Features & Benefits
- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates Anti-Roll Bar link flex
- Allows for neutral Anti-Roll Bar positioning
- Maximises all positions on adjustable Anti-Roll Bars
- Suits lowered or raised vehicles
Quantity required: 1
Only 3 Left In Stock...Hurry!
For immediate despatch.
Kit Includes: 2 x Links
Fitting Time: 1hr