Abarth
Alfa Romeo
Asia Motors
Aston Martin
Audi
Austin
Austin-Healey
Bentley
BMW
Chevrolet
Chrysler
Citroen
Daewoo
Daihatsu
Daimler
DMC
Dodge
Ferrari
Fiat
Ford
Ginetta
Hillman
Holden
Honda
Hummer
Hyundai
Indigo
Infiniti
Isuzu
Jaguar
Jeep
Jensen
Kia
Lancia
Land Rover
LDV
Lexus
Lotus
Mahindra
Maserati
Mazda
Mercedes-Benz
MG
Mini
Mitsubishi
Morris
Nissan
Noble
Opel
Peugeot
Porsche
Proton
Reliant
Renault
Rootes Group
Rover
Saab
Seat
Singer
Skoda
Smart
Ssangyong
Subaru
Sunbeam
Suzuki
Talbot
Tata
Tesla
Toyota
Triumph
TVR
Vauxhall
Volkswagen
Volvo
Does your car feel vague or unresponsive in corners?
Control Arm Lower Camber Bolt Kit
TRC0030
Quantity required: 1
Fitment Difficulty:
Fitting Time: 2hrs
Wheel-alignment required after fitment
Strut Top Spacer Kit
TRC008-6
Spacer Sleeve, suspension strut mount.
Raises vehicle approximately 10-12mm.
Raises vehicle approximately 10-12mm.
Quantity required: 1
Fitment Difficulty:
Fitting Time: 3hrs 30mins
Wheel-alignment required after fitment
Ball Joint Upper Boot Kit
TRC7000RK
Kit includes Boot and Cir Clips for one Control Arm
repair kit for SuperPro Roll Controll arms only
repair kit for SuperPro Roll Controll arms only
4
Control Arm Upper Complete Assembly
Fixed-Offset
TRC6560
Increase between +2.5 and +3.5 degrees of caster and up to 1.5 degrees of negative camber
Control Arm Lower-Inner Bush Kit
SPF3695K
Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution.
Quantity required: 1
Kit Includes: 4 x Polyurethane Bushes, 4 x Steel Tubes, 8 x Washer(s) - used for Steel and / or Polyurethane
Fitment Difficulty:
Fitting Time: 3hrs
6
Control Arm Upper-Inner Bush Kit
Standard Alignment Kit
SPF3796K
Standard Replacement
Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations.
Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution.
Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations.
Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution.
Quantity required: 1
Kit Includes: 4 x Polyurethane Bushes, 4 x Steel Tubes, 4 x Washer(s) - used for Steel and / or Polyurethane
Fitment Difficulty:
Fitting Time: 3hrs
7
Anti-Roll Bar Link Kit
Cut-To-Length
TRC4007
Cut To Length Link12mm Ball Joint Link
Minimum Length 90mm - Maximum Length 320mm
Minimum Length 90mm - Maximum Length 320mm
Heavy-Duty Adjustable
TRC12200
12mm Ball Joint Adjustable Link
Minimum Length 254 mm - Maximum Length 305 mm
Designed to maximise the benefit of Roll Control Adjustable Anti-Roll Bars and be used in place of that hard to find O.E link.
Features & Benefits
Minimum Length 254 mm - Maximum Length 305 mm
Designed to maximise the benefit of Roll Control Adjustable Anti-Roll Bars and be used in place of that hard to find O.E link.
Features & Benefits
- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates Anti-Roll Bar link flex
- Allows for neutral Anti-Roll Bar positioning
- Maximises all positions on adjustable Anti-Roll Bars
- Suits lowered or raised vehicles
Centre Bearing Alignment Kit
SPF4659K
Re-aligns Tail Shaft on lifted vehicles to correct pinion angles
Quantity required: 1
Kit Includes: 2 x Nuts, 6 x Washer(s) - used for Steel and / or Polyurethane
Fitment Difficulty:
Fitting Time: 1hr
Fixed Pin Protection Cap
SPF4848K
To be used with aftermarket Greaseable Fixed Pins
Side impact protection for the fuel tank when greaseable pins a fitted from the outside on the LHS of the vehicle
Side impact protection for the fuel tank when greaseable pins a fitted from the outside on the LHS of the vehicle
Spring Front Eye Bush Kit
SPF3802K
Quantity required: 1
Kit Includes: 4 x Polyurethane Bushes, 2 x Steel Tubes
Fitment Difficulty:
Fitting Time: 3hrs
Spring Rear Lower Bush Kit
SPF3804K
Quantity required: 1
Kit Includes: 4 x Polyurethane Bushes
Fitment Difficulty:
Fitting Time: 1hr 30mins
Spring Rear Upper Shackle Bush Kit
SPF3803K
Quantity required: 1
Kit Includes: 4 x Polyurethane Bushes
Fitment Difficulty:
Fitting Time: 1hr 30mins
13
Heavy Duty 3-Position Blade-Adjustable Anti-Roll Bar
20mm Bar (models without AdBlue)
RC0009RZ-20
Please note - this kit is not suitable for vehicles fitted with the AdBlue system.
Quantity required: 1
Kit Includes: 1 x Anti-Roll Bar, 1 x Fitting Kit
Fitment Difficulty:
Fitting Time: 4hrs
22mm Bar Bar (models with AdBlue)
RC0104RZ-22
Does not fit PX3 models currently?awaiting different fitting kit
Related News
- Ford Focus MK2 and Volvo C30/C70/S40/V50 Front Control Arm Kit (Product News)
- Caster Increase Bush Upgrades for the 2016-2018 Ford Focus RS (Product News)
- Ford Focus RS MK3 Upgraded Anti-Roll Bar Kit (Product News)
- Improving the Improved: Fast Fords benefit from the SuperPro effect (Product News)
- Breathing New Life into Classic Fords (General News)
- Britain’s Strongest Man and the World’s Ultimate Suspension Upgrades (Product News)