×

PRODUCT RANGES:

SELECT YOUR VEHICLE:

OR, SELECT VEHICLE MANUFACTURER:

Reduce Wear on Suspension Components

Front

1

Camber Adjusting Bolt Kit

SPF4351-14K
Adds +/- 1.5 Degrees camberCamber Bolt Kit 14mm

Quantity required: 1

Out of Stock

Contact us for availability.

Kit Includes: 2 x Bolts

2

Camber Adjusting Bolt Kit

SPF4351-17K
Adds +/- 1.5 Degrees camberCamber Bolt Kit 17mm

Quantity required: 1

Only 4 Left In Stock...Hurry!

For immediate despatch.

Kit Includes: 2 x Bolts

3

Control Arm Lower-Front Bush Kit

SPF2663K
Re-use original mounting pin

Quantity required: 1

Only 3 Left In Stock...Hurry!

For immediate despatch.

Kit Includes: 4 x Polyurethane Bushes

Fitment Difficulty:
Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 3hrs
Fitting Time icon

4

Control Arm Lower-Inner Rear Bush Kit - Double Offset

SPF1267K
Alignment Correction
1 Degree Caster Adjustment available
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.

Follow the installation instructions and enjoy the results!

Quantity required: 1

Out of Stock

Contact us for availability.

Kit Includes: 2 x Polyurethane Bushes, 2 x Steel Tubes

Fitment Difficulty:
Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 4hrs
Fitting Time icon

5

Control Arm Lower-Inner Rear Bush Kit - Single Offset

SPF1266K
Alignment Correction
0.5 Degree Caster Adjustment available
Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturer’s specifications.
Supplied with an offset bush to be fitted to the passenger side and a standard bush for the driver’s side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics.
Follow the installation instructions and the problem is solved.

Quantity required: 1

Out of Stock

Contact us for availability.

Kit Includes: 2 x Steel Tubes, 2 x Polyurethane Bushes

Fitment Difficulty:
Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 4hrs
Fitting Time icon

6

Control Arm Lower-Rear Bush Kit

SPF1265K
Standard replacement

Quantity required: 1

Out of Stock

Contact us for availability.

Kit Includes: 2 x Polyurethane Bushes, 2 x Steel Tubes

Fitment Difficulty:
Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 4hrs
Fitting Time icon

7

Engine Steady Mount Bush Kit

SPF1348K
Large end has 50mm inside diameter

Quantity required: 1

Out of Stock

Contact us for availability.

Kit Includes: 2 x Polyurethane Bushes, 2 x Steel Tubes

Fitment Difficulty:
Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 1hr 30mins
Fitting Time icon

8

Engine Steady Mount Bush Kit

SPF2706K
Large end has 65mm inside diameter

Quantity required: 1

Out of Stock

Contact us for availability.

Kit Includes: 2 x Steel Tubes, 2 x Polyurethane Bushes

Fitment Difficulty:
Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 2hrs
Fitting Time icon

9

Steering Rack & Pinion Mount Bush (Power Steering)

SPF1191K
Power steering

Quantity required: 1

In Stock

For immediate despatch.

Kit Includes: 3 x Polyurethane Bushes, 1 x Steel Tube

Fitment Difficulty:
Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 2hrs
Fitting Time icon

10

Sway Bar Link Kit - Heavy Duty Adjustable

TRC1025
10mm Ball Joint Adjustable Link
Minimum Length 75 mm - Maximum Length 85 mm
Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.

Features & Benefits
  • 6060-T5 Alloy Link
  • Ball for low friction and long life
  • Spanner provision for on-car adjustment
  • Eliminates sway bar link flex
  • Allows for neutral sway bar positioning
  • Maximises all positions on adjustable Sway Bars
  • Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation.

Quantity required: 1

Next Stock Due 14 June 2024

Pre-order now be ensure you get yours.

Kit Includes: 2 x Links

Fitment Difficulty:
Fitting Difficulty 2 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 1hr
Fitting Time icon

11

Sway Bar Mount Bush Kit

SPF1132-16K
Measure bar diameter 17,18,20,23mm availableavailable Sizes 15, 16, 17, 18, 20, 23 & 24mm
Sway Bar mount bushes are an important part of the whole sway bar system.
Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar.
An upgrade to SuperPro bushings can return lost sway bar performance and improve handling.

Quantity required: 1

Out of Stock

Contact us for availability.

Kit Includes: 2 x Polyurethane Bushes

Fitment Difficulty:
Fitting Difficulty 1 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 45mins
Fitting Time icon

12

Sway Bar Mount Bush Kit

SPF1132-17K
Measure bar diameter 17,18,20,23mm availableavailable Sizes 15, 16, 17, 18, 20, 23 & 24mm
Sway Bar mount bushes are an important part of the whole sway bar system.
Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar.
An upgrade to SuperPro bushings can return lost sway bar performance and improve handling.

Quantity required: 1

Out of Stock

Contact us for availability.

Kit Includes: 2 x Polyurethane Bushes

Fitment Difficulty:
Fitting Difficulty 1 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 45mins
Fitting Time icon

13

Sway Bar Mount Bush Kit

SPF1132-18K
Measure bar diameter 17,18,20,23mm availableavailable Sizes 15, 16, 17, 18, 20, 23 & 24mm
Sway Bar mount bushes are an important part of the whole sway bar system.
Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar.
An upgrade to SuperPro bushings can return lost sway bar performance and improve handling.

Quantity required: 1

Out of Stock

Contact us for availability.

Kit Includes: 2 x Polyurethane Bushes

Fitment Difficulty:
Fitting Difficulty 1 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 45mins
Fitting Time icon

14

Sway Bar Mount Bush Kit

SPF1132-20K
Measure bar diameter 17,18,20,23mm availableavailable Sizes 15, 16, 17, 18, 20, 23 & 24mm
Sway Bar mount bushes are an important part of the whole sway bar system.
Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar.
An upgrade to SuperPro bushings can return lost sway bar performance and improve handling.

Quantity required: 1

Out of Stock

Contact us for availability.

Kit Includes: 2 x Polyurethane Bushes

Fitment Difficulty:
Fitting Difficulty 1 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 45mins
Fitting Time icon

15

Sway Bar Mount Bush Kit

SPF1132-23K
Measure bar diameter 17,18,20,23mm availableavailable Sizes 15, 16, 17, 18, 20, 23 & 24mm
Sway Bar mount bushes are an important part of the whole sway bar system.
Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar.
An upgrade to SuperPro bushings can return lost sway bar performance and improve handling.

Quantity required: 1

Out of Stock

Contact us for availability.

Kit Includes: 2 x Polyurethane Bushes

Fitment Difficulty:
Fitting Difficulty 1 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 45mins
Fitting Time icon

16

Sway Bar Mount Bush Kit

SPF1132-24K
Measure bar diameter 17,18,20,23mm availableavailable Sizes 15, 16, 17, 18, 20, 23 & 24mm
Sway Bar mount bushes are an important part of the whole sway bar system.
Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar.
An upgrade to SuperPro bushings can return lost sway bar performance and improve handling.

Quantity required: 1

Out of Stock

Contact us for availability.

Kit Includes: 2 x Polyurethane Bushes

Fitment Difficulty:
Fitting Difficulty 1 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 45mins
Fitting Time icon

Rear

17

Camber Adjusting Bolt Kit

SPF4351-15K
Adds +/- 1.5 Degrees camberCamber Bolt Kit 15mm

Quantity required: 1

Out of Stock

Contact us for availability.

Kit Includes: 2 x Bolts

18

Control Arm Outer Bush Kit

SPF1105K
Fits outer of both front & rear arms

Quantity required: 1

Only 1 Left In Stock...Hurry!

For immediate despatch.

Kit Includes: 8 x Polyurethane Bushes, 4 x Steel Tubes

Fitment Difficulty:
Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 4hrs
Fitting Time icon

19

Sway Bar Link Kit - Heavy Duty Adjustable

TRC1045
10mm Ball Joint Adjustable Link
Minimum Length 100 mm - Maximum Length 120 mm
Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.

Features & Benefits
  • 6060-T5 Alloy Link
  • Ball for low friction and long life
  • Spanner provision for on-car adjustment
  • Eliminates sway bar link flex
  • Allows for neutral sway bar positioning
  • Maximises all positions on adjustable Sway Bars
  • Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation.

Quantity required: 1

In Stock

For immediate despatch.

Kit Includes: 2 x Links

Fitment Difficulty:
Fitting Difficulty 2 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 1hr
Fitting Time icon

20

Sway Bar Mount Bush Kit

SPF2297-18K
Replaces OEM 48818-06051, 15 & 16mm available

Quantity required: 1

Out of Stock

Contact us for availability.

Fitment Difficulty:
Fitting Difficulty 1 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 1hr
Fitting Time icon

21

Trailing Arm Bush Kit

SPF0823K

Quantity required: 1

Next Stock Due 05 July 2024

Pre-order now be ensure you get yours.

Kit Includes: 4 x Steel Tubes, 8 x Polyurethane Bushes

Fitment Difficulty:
Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 3hrs
Fitting Time icon

Contact your nearest Holden specialist

Back to Top