Reduce Tyre Wear
Track Rod Ends
TRC4090Quantity required: 2
Out of Stock
Contact us for availability.
Wheel-alignment required after fitment
33mm Heavy Duty Non Adjustable Anti-Roll Bar
RC0098F-33The resistance to the fitment of bigger front Anti-Roll Bars to 4WD vehicles is the flawed concept of the loss of articulation in the suspension.
If the replacement Anti-Roll Bars are designed correctly and the Anti-Roll Bar links are lengthened, replacement Anti-Roll Bars can be fitted with minimal or no loss of articulation.
Upgrading the front Anti-Roll Bars will
- Improve the stability by compensating for the change in centre of gravity of the chassis
- Increase tyre life
- Control body roll in load carrying and towing applications
- Improve safety with no loss of comfort or articulation
Quantity required: 1
Out of Stock
Contact us for availability.
Kit Includes: 1 x Anti-Roll Bar, 2 x Polyurethane Bushes
Control Arm Lower-Inner Bush Kit
SPF2991KQuantity required: 1
Only 1 Left In Stock...Hurry!
For immediate despatch.
Kit Includes: 4 x Polyurethane Bushes, 4 x Steel Tubes, 4 x Washer(s) - used for Steel and / or Polyurethane
Control Arm Upper-Inner Bush Kit
SPF2997KQuantity required: 1
Next Stock Due 14 June 2024
Pre-order now be ensure you get yours.
Kit Includes: 4 x Polyurethane Bushes, 4 x Steel Tubes
Control Arm Upper Complete Assembly - Fixed Offset
TRC6500Quantity required: 1
Out of Stock
Contact us for availability.
Wheel-alignment required after fitment
Lift Correction Upper Control Arm Kit
Vehicles Without Headlight Sensor
TRC500Based on a standard 2" lift - Approx 2" caster and approx an extra 1.5" of camber.
Not suitable for vehicles with Headlight Sensor.
Arms fitted with Uprated Ball joints and SuperPro Bushes to reduce Arm movement Getting the correct alignment is no longer a problem. Not only do these arms provide for better wheel alignment settings, they have been designed to include increased droop and clearance between the arm and strut.
These arms deliver up to 3 degree of caster along with extra camber, allowing for the optimum alignment settings for a 2" lifted vehicle.
Key Features:
- in-built camber and caster change to suit lifted vehicle
- In-built droop increase of approx. 10mm
- Increased clearance between spring and Control Arm at full articulation
- OE quality ball joint
- SuperPro Bushings
- Made in Australia
Quantity required: 1
Out of Stock
Contact us for availability.
Kit Includes: 2 x Arms
Wheel-alignment required after fitment
Vehicles With Headlight Sensor
TRC501Headlight sensor bracket on RH Arm Based on a standard 2" lift - Approx 2" caster and approx an extra 1.5" of camber.
Suits vehicles with Headlight Sensor.
Arms fitted with Uprated Ball joints and SuperPro Bushes to reduce Arm movement Getting the correct alignment is no longer a problem. Not only do these arms provide for better wheel alignment settings, they have been designed to include increased droop and clearance between the arm and strut.
These arms deliver up to 3 degree of caster along with extra camber, allowing for the optimum alignment settings for a 2" lifted vehicle.
Key Features:
- in-built camber and caster change to suit lifted vehicle
- In-built droop increase of approx. 10mm
- Increased clearance between spring and Control Arm at full articulation
- OE quality ball joint
- SuperPro Bushings
- Made in Australia
Quantity required: 1
Only 2 Left In Stock...Hurry!
For immediate despatch.
Kit Includes: 2 x Arms
ReadyStrut Top Caps
RS004Shock Absorber Lower Bush Kit
SPF2940PKQuantity required: 1
In Stock
For immediate despatch.
Kit Includes: 2 x Polyurethane Bushes
Droop Stop Bush Kit
SPF4633KQuantity required: 1
Only 1 Left In Stock...Hurry!
For immediate despatch.
Kit Includes: 2 x Bump Stops
Strut Top Spacer Kit
TRC008-6Anti-Roll Bar Link and Bush Kit
SPF2966BKQuantity required: 1
Only 2 Left In Stock...Hurry!
For immediate despatch.
Kit Includes: 8 x Nuts, 2 x Polyurethane Rods, 8 x Washer(s) - used for Steel and / or Polyurethane, 8 x Polyurethane Bushes
Anti-Roll Bar Link Bush Kit
SPF2755SKQuantity required: 2
Out of Stock
Contact us for availability.
Kit Includes: 4 x Polyurethane Bushes
24mm Heavy Duty Non Adjustable Anti-Roll Bar
RC0098R-24The resistance to the fitment of rear Anti-Roll Bars to 4WD vehicles is the flawed concept of the loss of articulation in the suspension.
If the replacement Anti-Roll Bars and link package is designed correctly, replacement Anti-Roll Bars can be fitted with minimal or no loss of articulation.
Upgrading to Roll Control Anti-Roll Bars will:
- Improve the stability by compensating for the change in centre of gravity of the chassis
- Neutralise the factory understeer
- Increase tyre life
- Control the roll in load carrying and towing applications
- Improve safety with no loss of comfort or articulation
Quantity required: 1
Out of Stock
Contact us for availability.
Kit Includes: 1 x Anti-Roll Bar, 2 x Polyurethane Bushes
Related News
- Alex Bones wins Round 1 of the Time Attack series in his Evo 5 RS (Motorsport News)