Abarth
Alfa Romeo
Asia Motors
Aston Martin
Audi
Austin
Austin-Healey
Bentley
BMW
Chevrolet
Chrysler
Citroen
Daewoo
Daihatsu
Daimler
DMC
Dodge
Ferrari
Fiat
Ford
Ginetta
Hillman
Holden
Honda
Hummer
Hyundai
Indigo
Infiniti
Isuzu
Jaguar
Jeep
Jensen
Kia
Lancia
Land Rover
LDV
Lexus
Lotus
Mahindra
Maserati
Mazda
Mercedes-Benz
MG
Mini
Mitsubishi
Morris
Nissan
Noble
Opel
Peugeot
Porsche
Proton
Reliant
Renault
Rootes Group
Rover
Saab
Seat
Singer
Skoda
Smart
Ssangyong
Subaru
Sunbeam
Suzuki
Talbot
Tata
Tesla
Toyota
Triumph
TVR
Vauxhall
Volkswagen
Volvo
My steering is soo much sharper!
Engine Front Torque Arm
KDT974
The torque arm assists in controlling the engine and drivetrain forward and aft twisting motion. The torque arm is inherently soft due to the high compliance rubber bushing design and was built for comfort and not responsiveness or feel. Whiteline's torque arm mount bushing is built to handle the demands of high torque and power output engines by limiting the amount of movement the engine and drivetrain will place upon the pitch stop. Utilising low compliance bushing technology this eliminates the slop, twisting and shudder found in the OEM rubber bushings allowing for a faster, positive, responsive feel of power delivery on and off the throttle.
2
Front And Rear Suspension Bush Kit
Standard Alignment
KIT0169K
Kit Includes: 1X SPF3315K, 1XSPF3368K, 1 x SPF3466K, 1X SPF2323K, 1X SPF2324K, 2X SPF2325K.
Caster & Camber Adjustable
KIT0170K
Kit Includes: 1X SPF3315K, 1XSPF3370K, 1 x SPF3466K, 1X SPF2323K, 1X SPF2324K, 2X SPF2326K.
Front and Rear Anti-Roll Bar Upgrade Kit
BMK001
Important Notes: Contains BMF57Z, BMR88Z, KLC151 and KLC185 - essential to 'Activate more grip'
Engineered to 'Activate More Grip', BMK001 is a packaged solution designed to improve performance and enhance the driving experience of your vehicle. Boasting a 27mm 2 point adjustable front Anti-Roll bar and 27mm 2 point adjustable rear Anti-Roll bar, the kit is completed with high quality Anti-Roll bar links and mounting accessories that ensure optimum performance and ease of installation. Achieve perfect balance and precise tuning with this Whiteline Anti-Roll Bar Kit.
Engineered to 'Activate More Grip', BMK001 is a packaged solution designed to improve performance and enhance the driving experience of your vehicle. Boasting a 27mm 2 point adjustable front Anti-Roll bar and 27mm 2 point adjustable rear Anti-Roll bar, the kit is completed with high quality Anti-Roll bar links and mounting accessories that ensure optimum performance and ease of installation. Achieve perfect balance and precise tuning with this Whiteline Anti-Roll Bar Kit.
Complete Control Arm Assembly Kit
TRC1050
Kit includes both arms, standard alignment front bushes and, standard alignment rear bushes, brackets and bolts.
Quantity required: 1
Out of Stock
Contact us for availability.
Kit Includes: 2 x Arms, 2 x BRACKETS
Fitment Difficulty:
Fitting Time: 1hr
Anti-Lift Kit - Front Wishbone Control arm lower inner rear bushing - Ford/Mazda/Volvo
KCA428
Important Notes: Adds +0.5deg caster + Anti-Lift.
Whiteline Anti Lift Kits are primarily designed to improve traction and cornering grip under power. By increasing static caster and improving front-end geometry, the new alloy mounts coupled with low-compliance synthetic elastomer bushings dramatically sharpen initial turn-in response and reduce understeer.
Whiteline Anti Lift Kits are primarily designed to improve traction and cornering grip under power. By increasing static caster and improving front-end geometry, the new alloy mounts coupled with low-compliance synthetic elastomer bushings dramatically sharpen initial turn-in response and reduce understeer.
6
Control Arm Bush Kit
7
Control Arm Lower-Inner Front Bush Kit
12mm Bolt
SPF2137K
12mm Bolt
Quantity required: 1
In Stock
For immediate despatch.
Kit Includes: 4 x Polyurethane Bushes, 2 x Steel Tubes
14mm Bolt
SPF3115K
14mm Bolt
Quantity required: 1
In Stock
For immediate despatch.
Kit Includes: 2 x Steel Tubes, 4 x Polyurethane Bushes
8
Control Arm Lower-Inner Rear Bush
Standard Alignment Settings
SPF3368K
Standard replacement - fits OEM bracket. If the original bracket is in poor condition or shows any evidence of stretching SPF4653K which includes a replacement bracket should be used.
Quantity required: 1
In Stock
For immediate despatch.
Kit Includes: 2 x Steel Tubes, 1 x Instruction Sheet, 2 x Washer(s) - used for Steel and / or Polyurethane, 2 x Sleeves, 2 x Polyurethane Bushes
Standard Alignment Settings with Bracket and Bolts
SPF4653K
Standard replacement. Offers quicker and easier fitment and is a solution when OEM brackets are stretched or in poor condition.
Quantity required: 1
Only 3 Left In Stock...Hurry!
For immediate despatch.
Kit Includes: 2 x Brackets
Steering-Pull Correction Kit
SPF3369K
1 x Offset 1 x Standard Bushings; Approx 0.5 Degree Caster change
Quantity required: 1
Out of Stock
Contact us for availability.
Kit Includes: 2 x Polyurethane Bushes, 2 x Sleeves, 2 x Washer(s) - used for Steel and / or Polyurethane, 1 x Instruction Sheet, 2 x Steel Tubes
Performance Alignment Correction Kit
SPF3370K
2 x Offset Bushings; Approx 0.5 Degree Caster change per bush
Quantity required: 1
Only 3 Left In Stock...Hurry!
For immediate despatch.
Kit Includes: 2 x Steel Tubes, 1 x Instruction Sheet, 2 x Washer(s) - used for Steel and / or Polyurethane, 2 x Sleeves, 2 x Polyurethane Bushes
27mm Extra-Heavy-Duty Front Anti-Roll Bar Upgrade
BMF57Z
Important Notes: 27mm - 2-Position Adjustable.
Engineered to 'Activate More Grip', Anti-Roll bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tyres, increasing cornering grip and improving outright performance. This Whiteline 27mm - 2-Position Adjustable Anti-Roll bar = more grip = better handling = outright performance - it's the best dollar-for-dollar handling improvement you can make to your vehicle. In fact, benefits extend to handling, safety and tyre wear improvements without affecting ride quality or comfort.
Engineered to 'Activate More Grip', Anti-Roll bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tyres, increasing cornering grip and improving outright performance. This Whiteline 27mm - 2-Position Adjustable Anti-Roll bar = more grip = better handling = outright performance - it's the best dollar-for-dollar handling improvement you can make to your vehicle. In fact, benefits extend to handling, safety and tyre wear improvements without affecting ride quality or comfort.
Adjustable Front Anti-Roll Bar Links
KLC151
Not many enthusiasts are aware that OE and, more importantly, aftermarket Anti-Roll bar effectiveness can be hindered by worn or inadequate mounts, drop links and lateral stoppers. Whiteline adjustable Anti-Roll bar links are engineered to be up to the task with top spec, lightweight componentry combined with a window of adjustability, eliminating Anti-Roll bar preload on installation but, most importantly, ensuring the maximum output of the Anti-Roll bar for improved grip and better handling.
11
Anti-Roll Bar Mount To Chassis Bush
To Fit 23mm Bar on Diesel Vehicles
SPF2620-23K
This suits standard bar size of 23mm on diesel vehicles but please measure bar diameter 20, 22, 24mm available
Quantity required: 1
Out of Stock
Contact us for availability.
Kit Includes: 2 x Polyurethane Bushes
Fitment Difficulty:
Fitting Time: 1hr
To Fit Aftermarket Round Bars
SPF2141-21K
Suits 21mm aftermarket round bar. Measure bar diameter. 20 and 22mm options are also available (SPF2141-20K or SPF2141-22K)
Quantity required: 1
Only 1 Left In Stock...Hurry!
For immediate despatch.
Kit Includes: 2 x Polyurethane Bushes
12
Anti-Roll Bar Link Kit
Cut-To-Length Link
TRC4004
10mm Ball Joint. Minimum length 80mm - maximum length 320mm
Quantity required: 2
Out of Stock
Contact us for availability.
Kit Includes: 1 x Link
Fitment Difficulty:
Fitting Time: 30mins
Sway Bar Link
TRC4025
Standard Replacement10mm Ball Joint Link 180 Degree opposed Length 300 mm center to center
Quantity required: 2
In Stock
For immediate despatch.
Kit Includes: 1 x Link
Fitment Difficulty:
Fitting Time: 30mins
Heavy-Duty Adjustable
TRC10200
10mm Ball Joint Adjustable Link. Minimum Length 245mm. Maximum Length 305mm. OE length 270mm
Quantity required: 1
Out of Stock
Contact us for availability.
Kit Includes: 2 x Links
Fitment Difficulty:
Fitting Time: 1hr
27mm Heavy-Duty Blade Adjustable Rear Anti-Roll Bar
BMR88Z
Important Notes: 27mm - 2 point adjustable - TUV certified
Engineered to 'Activate More Grip', Anti-Roll bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tires, increasing cornering grip and improving outright performance. This Whiteline 27mm 2-point adjustable Anti-Roll bar = more grip = better handling = outright performance - it's the best dollar-for-dollar handling improvement you can make to your vehicle. In fact, benefits extend to handling, safety and tyre wear improvements without affecting ride quality or comfort.
Engineered to 'Activate More Grip', Anti-Roll bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tires, increasing cornering grip and improving outright performance. This Whiteline 27mm 2-point adjustable Anti-Roll bar = more grip = better handling = outright performance - it's the best dollar-for-dollar handling improvement you can make to your vehicle. In fact, benefits extend to handling, safety and tyre wear improvements without affecting ride quality or comfort.
Rear Anti-Roll Bar Link Kit
KLC185
Not many enthusiasts are aware that OE and, more importantly, aftermarket Anti-Roll bar effectiveness can be hindered by worn or inadequate mounts, drop links and lateral stoppers. Whiteline adjustable Anti-Roll bar links are engineered to be up to the task with top spec, lightweight componentry combined with a window of adjustability, eliminating Anti-Roll bar preload on installation but most importantly ensuring the maximum output of the Anti-Roll bar for improved grip and better handling.
Rear - Lower Front Control Arms
KTA137
Heavy-duty adjustable alloy rear lower front control arms are designed to allow for increased range with easy on-car toe adjustment. Low-compliance bushings are used to minimise NVH and maximise longevity.
Adjustable Control Arm Upper Rear
KTA138A
Heavy-duty control arms provide on-car adjustability of camber alignment. This results in improved traction, increased cornering grip and better tyre life - ultimately improving overall performance.
Rear Control arms - Lower Front Arms
WA401
Important Notes: Supplied as a single arm so you will need to order two. Complete arm fitted with bushings.
Most would agree that the time and stress to remove and replace bushings and ball joints to suspension arms can be hard to justify. Making up press tools and damaging arms are just two of the problems one can endure. Why put yourself through it when you can purchase complete arms, fitted with market leading Whiteline synthetic elastomer bushings.
Most would agree that the time and stress to remove and replace bushings and ball joints to suspension arms can be hard to justify. Making up press tools and damaging arms are just two of the problems one can endure. Why put yourself through it when you can purchase complete arms, fitted with market leading Whiteline synthetic elastomer bushings.
Rear Control Arms - Upper Arms
WA402
Most would agree that the time and stress to remove and replace bushings and ball joints to suspension arms can be hard to justify. Making up press tools and damaging arms are just two problems one can endure. Why put yourself through it when you can purchase complete arms, fitted with market-leading Whiteline synthetic elastomer bushings.
Blade Trailing Arm Front Bush
SPF3466K
Do not remove original shell 09/2002-05/2005
Quantity required: 1
Only 3 Left In Stock...Hurry!
For immediate despatch.
Kit Includes: 2 x Polyurethane Bushes, 1 x Instruction Sheet, 2 x Steel Tubes
Fitment Difficulty:
Fitting Time: 4hrs
Wheel-alignment required after fitment
Blade Trailing Arm Front Bush
SPF3466KDo not remove original shell
Quantity required: 1
Only 3 Left In Stock...Hurry!
For immediate despatch.
Kit Includes: 2 x Polyurethane Bushes, 1 x Instruction Sheet, 2 x Steel Tubes
Toe Control Arm Lower-Inner & Outer Bush Kit
SPF2323K
Front Arm Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life. SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution.
Quantity required: 1
Next Stock Due 14 August 2024
Pre-order now be ensure you get yours.
Kit Includes: 4 x Polyurethane Bushes, 4 x Steel Tubes
Control Arm Lower Inner and Outer Bush
SPF2324K
Rear Arm. Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations.
Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution.
Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution.
Quantity required: 1
Only 3 Left In Stock...Hurry!
For immediate despatch.
Kit Includes: 4 x Sleeves, 4 x Steel Tubes, 4 x Polyurethane Bushes
23
Control Arm Upper-Inner Bush Kit
Standard Alignment Kit
SPF2325K
Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations.
Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution.
Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution.
Quantity required: 1
Next Stock Due 14 August 2024
Pre-order now be ensure you get yours.
Kit Includes: 2 x Polyurethane Bushes, 2 x Steel Tubes, 2 x Sleeves
Performance Alignment Kit
SPF2326K
1 Degree of camber adjustment. To be used in this position when SPF2326K is already used in the outer position and 2 Degrees Camber adjustment in total required
Quantity required: 1
In Stock
For immediate despatch.
Kit Includes: 2 x Sleeves, 2 x Steel Tubes, 2 x Polyurethane Bushes
24
Control Arm Upper-Outer Bush Kit
Standard Alignment Kit
SPF2325KControl arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations.
Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution.
Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution.
Quantity required: 1
Next Stock Due 14 August 2024
Pre-order now be ensure you get yours.
Kit Includes: 2 x Polyurethane Bushes, 2 x Steel Tubes, 2 x Sleeves
Performance Alignment Kit
SPF2326KPrefered Position to gain 1 Degree Camber change. A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Quantity required: 1
In Stock
For immediate despatch.
Kit Includes: 2 x Sleeves, 2 x Steel Tubes, 2 x Polyurethane Bushes
25
Anti-Roll Bar Mount To Chassis Bush
To Fit OE Bar
SPF2578KOE bar with flats at bush mounting point
Quantity required: 1
Only 2 Left In Stock...Hurry!
For immediate despatch.
Kit Includes: 4 x Polyurethane Bushes
To Fit Aftermarket Round Bars
SPF2141-21KSuits 21mm aftermarket round bar. Measure bar diameter. 20 and 22mm available (SPF2141-20K or SPF2141-22K)
Quantity required: 1
Only 1 Left In Stock...Hurry!
For immediate despatch.
Kit Includes: 2 x Polyurethane Bushes
Anti-Roll Bar Link Kit
TRC4002
Standard Replacement. 10mm Horizontal Ball Joint Link with 10mm Vertical Ball Joint. Length 76-86mm center to center
Quantity required: 2
Out of Stock
Contact us for availability.
Kit Includes: 1 x Link
Fitment Difficulty:
Fitting Time: 30mins
Related News
- TRC1050: Replacement Front Control Arms for the Mazda 3 BK (Product News)