Abarth
Alfa Romeo
Asia Motors
Aston Martin
Audi
Austin
Austin-Healey
Bentley
BMW
Chevrolet
Chrysler
Citroen
Daewoo
Daihatsu
Daimler
DMC
Dodge
Ferrari
Fiat
Ford
Ginetta
Hillman
Holden
Honda
Hummer
Hyundai
Indigo
Infiniti
Isuzu
Jaguar
Jeep
Jensen
Kia
Lancia
Land Rover
LDV
Lexus
Lotus
Mahindra
Maserati
Mazda
Mercedes-Benz
MG
Mini
Mitsubishi
Morris
Nissan
Noble
Opel
Peugeot
Porsche
Proton
Reliant
Renault
Rootes Group
Rover
Saab
Seat
Singer
Skoda
Smart
Ssangyong
Subaru
Sunbeam
Suzuki
Talbot
Tata
Tesla
Toyota
Triumph
TVR
Vauxhall
Volkswagen
Volvo
My steering is soo much sharper!
Control Arm Lower Assembly Kit
TRC1074
Left and Right Wishbones for Standard Replacement and Repair Upgrade Our front lower control arm kit for the Kia Sportage and the Hyundai IX35 has been designed to be an easy repair solution. Offering both alignment and vehicle handling improvements. Designed not just as a repair solution but as an upgrade! Supplied as a complete kit and fully assembled with special uprated ball joints and proprietary SuperPro bushings. We have made TRC1074 by far the best repair choice on the market. These arms utilise the SuperPro bushings and are manufactured from a high strength material. By eliminating the O.E style rubber bushing, these arms have been optimised for longevity, durability and performance, without any unwanted NVH. SuperPro Control Arms are perfectly suited as a standard replacement and are an upgrade from the factory arms, eliminating the undesirable arm movement to maintain better steering geometry in all driving conditions. SuperPro Tip - SuperPro strongly advises that both arms should always be replaced at the same time to maintain the correct geometry and operation of the vehicle.
Quantity required: 1
Out of Stock. No longer stocked.
Fitment Difficulty:
Fitting Time: 1hr 30mins
Control Arm Lower-Front Bush Kit
SPF4383K
Quantity required: 1
Was £57.79. Now just £28.90 (inc. VAT)
Only 2 Left In Stock...Hurry!
For immediate despatch.
Kit Includes: 4 x Polyurethane Bushes, 2 x Steel Tubes
Fitment Difficulty:
Fitting Time: 3hrs
3
Control Arm Lower-Rear Bush Kit
Standard Alignment
SPF3776K
Standard ReplacementControl arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution.
Quantity required: 1
Was £145.44. Now just £72.72 (inc. VAT)
Only 2 Left In Stock...Hurry!
For immediate despatch.
Kit Includes: 2 x Polyurethane Bushes, 2 x Steel Tubes, 4 x Spacers
Fitment Difficulty:
Fitting Time: 3hrs
Steering-Pull Correction Kit
SPF3808K
Alignment Correction. Caster AdjustmentUse this kit to rectify a steering pull after a vehicle has been aligned to the manufacturer's specifications.
Supplied with an offset bush to be fitted to the passenger side and a standard bush for the driver's side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics.
Follow the installation instructions and the problem is solved.
Supplied with an offset bush to be fitted to the passenger side and a standard bush for the driver's side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics.
Follow the installation instructions and the problem is solved.
Quantity required: 1
Was £145.44. Now just £72.72 (inc. VAT)
Only 1 Left In Stock...Hurry!
For immediate despatch.
Kit Includes: 2 x Polyurethane Bushes, 2 x Steel Tubes, 4 x Spacers
Performance Alignment
SPF3809K
Alignment Correction. Caster Adjustment. A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results!
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results!
Quantity required: 1
Now just £36.00 (inc. VAT)
In Stock
For immediate despatch.
Kit Includes: 2 x Polyurethane Bushes, 2 x Steel Tubes, 4 x Spacers
Fitment Difficulty:
Fitting Time: 3hrs
4
Anti-Roll Bar Link Kit
Standard Replacement
TRC4047
Quantity required: 2
Was £27.86. Now just £13.93 (inc. VAT)
Only 4 Left In Stock...Hurry!
For immediate despatch.
Fitment Difficulty:
Fitting Time: 30mins
Heavy Duty Adjustable
TRC12200
12mm Ball Joint Adjustable Link
Minimum Length 254 mm - Maximum Length 305 mm
Designed to maximise the benefit of Roll Control Adjustable Anti-Roll Bars and be used in place of that hard to find O.E link.
Features & Benefits
Minimum Length 254 mm - Maximum Length 305 mm
Designed to maximise the benefit of Roll Control Adjustable Anti-Roll Bars and be used in place of that hard to find O.E link.
Features & Benefits
- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates Anti-Roll Bar link flex
- Allows for neutral Anti-Roll Bar positioning
- Maximises all positions on adjustable Anti-Roll Bars
- Suits lowered or raised vehicles
Quantity required: 1
Out of Stock. No longer stocked.
Kit Includes: 2 x Links
Fitment Difficulty:
Fitting Time: 1hr
Standard Replacement
TRC4053
Quantity required: 2
Was £31.91. Now just £15.96 (inc. VAT)
Only 4 Left In Stock...Hurry!
For immediate despatch.
Fitment Difficulty:
Fitting Time: 30mins
Heavy Duty Adjustable with Vertical Ball Joint
TRC1225V
12mm Ball Joint Adjustable Link with 12mm Vertical Ball Joint
Minimum Length 110 mm - Maximum Length 125 mm
Designed to maximise the benefit of Roll Control Adjustable Anti-Roll Bars and be used in place of that hard to find O.E link.
Features & Benefits
Minimum Length 110 mm - Maximum Length 125 mm
Designed to maximise the benefit of Roll Control Adjustable Anti-Roll Bars and be used in place of that hard to find O.E link.
Features & Benefits
- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates Anti-Roll Bar link flex
- Allows for neutral Anti-Roll Bar positioning
- Maximises all positions on adjustable Anti-Roll Bars
- Suits lowered or raised vehicles
Quantity required: 1
Out of Stock. No longer stocked.
Kit Includes: 2 x Links
Fitment Difficulty:
Fitting Time: 1hr
Heavy Duty Adjustable
TRC1245A
12mm Ball Joint Adjustable Link Minimum Length 125 mm - Maximum Length 145 mm Designed to maximise the benefit of Roll Control Adjustable Anti-Roll Bars and be used in place of that hard to find O.E link. Features & Benefits- 6060-T5 Alloy Link - Ball for low friction and long life - Spanner provision for on-car adjustment - Eliminates Anti-Roll Bar link flex - Allows for neutral Anti-Roll Bar positioning - Maximises all positions on adjustable Anti-Roll Bars - Suits lowered or raised vehicles SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation.
Quantity required: 1
Out of Stock. No longer stocked.
Kit Includes: 2 x Links
Fitment Difficulty:
Fitting Time: 1hr