TRC6560

Control Arm Upper Complete Assembly (Fixed-Offset) for the 2015 and later Mazda BT-50 UR Series All Models

Getting the correct alignment on your lifted Ranger / BT-50 is no longer a problem.

The SuperPro Fixed Offset Upper Control Arm is an all-in-one solution for any vehicle that has been lifted between 40mm and 65mm (2.5”). Providing an increase between 2.5 and 3.5 degrees of caster and up to 1.5 degrees of negative camber increase (figures quoted are based off a 50mm Lift) along with greater clearance to the coil over strut and more articulation of the arm.

These arms fitted with heavy-duty ball joints and upgraded SuperPro bushes to reduce arm movement.

Key Features

Fixed offset alignment correction arms
In-built camber and caster change to suit lifted vehicle
Increased clearance between spring and Control Arm at full articulation
Heavy Duty ball joint
SuperPro Bushings

SuperPro offers a lifetime warranty on all Polyurethane products and a 3 year or 36,000 mile warranty on all metal products, end links and ball joints. This warranty covers the cost of replacing the parts in the case of manufacturing defects, material defects and is subject to a Fair Use assessment.

Increase between +2.5 and +3.5 degrees of caster and up to 1.5 degrees of negative camber