TRC500

Lift Correction Upper Control Arm Kit (Vehicles Without Headlight Sensor) for the 2008 and later Mitsubishi Challenger PB, PC 2.5 DI-D

SuperPro offers a lifetime warranty on all Polyurethane products and a 3 year or 36,000 mile warranty on all metal products, end links and ball joints. This warranty covers the cost of replacing the parts in the case of manufacturing defects, material defects and is subject to a Fair Use assessment.

Left and Right Arms for Lifted Vehicles with Caster and Camber Correction.

Based on a standard 2" lift - Approx 2" caster and approx an extra 1.5" of camber.

Not suitable for vehicles with Headlight Sensor.

Arms fitted with Uprated Ball joints and SuperPro Bushes to reduce Arm movement Getting the correct alignment is no longer a problem.Not only do these arms provide for better wheel alignment settings, they have been designed to include increased droop and clearance between the arm and strut.

These arms deliver up to 3 degree of caster along with extra camber, allowing for the optimum alignment settings for a 2" lifted vehicle.

Key Features:

• in-built camber and caster change to suit lifted vehicle
• In-built droop increase of approx. 10mm
• Increased clearance between spring and Control Arm at full articulation
• OE quality ball joint
• SuperPro Bushings
• Made in Australia

 

Out of Stock

Contact us for availability.

Kit Includes:

• 2 x Arms

1

Wheel-alignment required after fitment

7.7400kg

Media Files:

Other Similar Parts

• TRC5000
• TRC5000-ED

 

 

 

Suitable for:

• Mitsubishi Challenger PB, PC All-wheel Drive (2008 and later)
• Mitsubishi Challenger PB, PC Rear Wheel Drive (2008 and later)
• Mitsubishi L200 KA and KB (or Triton ML and MN) All-wheel Drive (2005 to 2016)
• Mitsubishi L200 KA and KB (or Triton ML and MN) Rear Wheel Drive (2005 to 2016)
• Mitsubishi L200 MQ All-wheel Drive (2014 and later)
• Mitsubishi L200 MQ Rear Wheel Drive (2014 and later)
• Mitsubishi Shogun Sport QE All-wheel Drive (2015 and later)